Carson Built Poker Tables
Feature Table
This specific table to a lot of thinking and planning. I pieced together everything I wanted alittle bit at a time. I wanted a completely different yet similiar design that no one has ever seen before. I wanted rope lights around a racetrack that was raised above the playing surface.
Here it is! Complete with rope lights under the rail as well as the raised racetrack. I still have to deceid whether to put the alligator skin vinyl over all the rail (as pictured) or put it under the 3 3/5" ring and wrap the lower 1 1/2" with a different vinyl and use decorative tacks. But that decision is for a later date.
Here are the dimensions of the table.
Step 1: Supplies
1 piece of MDF plywood- 4 by 8- 3/4" thick Home Depot
1 piece of Oak plywood- 4 by 8- 3/4" thick Home Depot
1 piece of particle board- 4 by 8- 3/4" thick Home Depot
| 54''x 7' felt cloth
|
| Wal-Mart
| |
|
54'' x 8' upholstery vinyl
|
| Jo-Ann Fabric
| |
| 1/8'' x 54'' x 8' foam
|
| Jo-Ann Fabric
| |
|
1'' x 24'' x 76'' high-density foam
|
| Jo-Ann Fabric
| |
|
|
|
| |
| 3M ''77'' spray adhesive
|
| Wal-Mart
| |
| box of 1/2'' heavy duty staples (1000 ct.)
|
| Wal-Mart/Target
| |
|
|
|
| |
| box of 1-1/2'' construction screws (50 ct.)
|
| Wal-Mart/Target
| |
| 3M coarse sandpaper (60 grit, 4 pack)
|
| Wal-Mart/Target
| |
|
|
|
| |
Step 2: Measurements
THIS IS STILL UNDER CONSTRUCTION, COME BACK LATER!!!
|
